Horizontal Bandsaw Series
Precision-focused cutting for workshops and fabrication units.
Performance Specifications
| Models | MSD-241DCA | MSD-331DCA | MSD-431DCA |
|---|---|---|---|
| Cutting Capacity Round | 240 mm | 325 mm | 425 mm |
| Cutting Capacity Square | 240 mm | 325 mm | 425 mm |
| Cutting Capacity Rectangle | 3760 x 27 x 0.9 mm | 4100 x 34 x 1.07 mm | 5200 x 41 x1.3 mm |
| Blade Speed VFD mtr/min | 20-100 | 20-100 | 20-100 |
| Gearbox | Helical Geared motor | Helical Geared motor | Helical Geared motor |
| Hydraulic Reservoir | 40 ltrs | 40 ltrs | 80 ltrs |
| Coolant Reservoir | 60 ltrs | 60 ltrs | 80 ltrs |
| Blade Tension | Hydraulic | Hydraulic | Hydraulic |
| Job feeding function | Hydraulic | Hydraulic | Hydraulic |
| Job feeding Stroke | 350 mm | 350 mm | 350 mm |
| Bundle cutting Capacity | 240 x 150 | 325 x 150 | 425 x 150 |
| Saw Motor Capacity 415v ac, 50hz, 1400 rpm | 3 hp | 3hp | 5 hp |
| Hydraulic Motor Capacit 415v ac, 50hz, 1400 rpm | 1 hp | 1 hp | 1.5 hp |
| Coolant pump Capacity 415v ac, 50hz, 2800 rpm | 0.15 hp | 0.15 hp | 0.15 hp |
| Wire brush Motor Capacity 415v ac, 50hz, 1400 rpm | 0.25 hp | 0.25 hp | 0.25 hp |
| Approx. Weight | 2000 Kg | 2300 Kg | 2700 Kg |
| Overall Dimension L x W x H | 2250 x 2125 x 1275 mm | 2425 x 2850 x 1275 mm | 2450 x 3375 x 1575 mm |
| Optional Servo Job feeding Stroke | 500 mm | 500 mm | 500 mm |
Machine Info
MSD-241DCA, 331DCA and 431DCA models are hydraulic fully-automatic bansdsaw machine with hydraulic job feeding facility, which is used mainly in high productions workshops (use up to 20 hours per day). The saw band is driven by VFD, induction 3 phase motor & 3 phase coolant pump and an oil-bath helical geared motor.
Machine is equipped with precise double columns and 1 piece C-frame (graded cast) for saw head, Auto indexing shuttle equipped with wider and heavy vices for secure material clamping. The material clamping is done very easily by using a push button, whose movable jaw is guided by 8 hard chrome shafts with harden plates and precise hydraulic cylinders. During cutting, the material can be effectively clamped by vice, Material feeding & lifting is carried out by hydraulic cylinders set by control panel PLC logic.
Accessories
Chip removing wire brush
Job roller stand 1 meter long
Bi-metal bandsaw blade
Servo motor for accurate job length feeding
Servo motor for accurate job length feeding
Automatic chip conveyor system
Variable vice pressure for thin walled job (use for soft material)
Hydraulic bundle clamping attachment for more than 1 job to cut
Features
High efficiency power transmission to saw thru helical geared motor (oil filled)
7” Touch panel for all setup and all indication
Automatic oil lubrication system
Shuttle type automatic job length feeding with very unique design use to push job 100% easier
Photo Gallery
